Audio Technica

AT899

https://www.mgmaudio.ch/web/image/product.template/367/image_1920?unique=ce88230

Subminiature Omnidirectional Condenser Lavalier Microphone

CHF 351.53 351.53000000000003 CHF CHF 351.53 Inklusive MwSt.

CHF 351.53 Inklusive MwSt.

Preis auf Anfrage

Auf Lager

Diese Kombination existiert nicht.

Geschäftsbedingungen
Versand: 2-3 Arbeitstage

The AT899 subminiature omnidirectional microphone is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. Includes a clothing clip, viper clip, magnet clip and lanyard, two windscreens, two element covers, three single mic holders, and two double mic holders.

Available configurations:

AT899: 9.8' (3.0 m) permanently attached cable terminated with TA3F connector; AT8537 power module (with 80 Hz high-pass filter) for battery or phantom power.

AT899cH: 55" (1.4 m) permanently attached cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters; no power module.

AT899cH-TH: same as AT899cH but in "theater" color (beige). 

AT899cW: 55" (1.4 m) permanently attached cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters; no power module.

AT899cW-TH: same as AT899cW but in "theater" color (beige).

 

Microphones
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 20 - 20,000 Hz
Low Frequency Roll Off 80 hz, 12 dB/octave
Open Circuit Sensitivity Phantom: -43dB (7.0mV), re 1V at 1 Pa
Battery: -46dB (5.0mV), re 1V at 1 Pa
Output Impedance Phantom: 200 ohms - Battery: 250 ohms (wired only)
Maximum Input Sound Level Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. - Battery: 116 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 108dB,1 kHz at max SPL - Battery: 86dB,1 kHz at max SPL
Signal-to-Noise Ratio 64dB,1 kHz at 1 Pa
Phantom Power Requirements 11- 52V DC, 2 mA typical
Battery Type 1.5V AA-UM3
Battery Current/Life 0.4 mA typical / 1200 hours (alkaline battery)
Switches Flat, roll-off (recessed)
Weight Microphone 0.5 g - Power module 102 g
Cable 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
Dimensions Microphone 16.0 mm long, 5.0 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective