ECI 6 MK II
Integrated amplifier 2 x 125W
The new ECI 6 MKII is a powerful integrated amplifier equipped with 4 analogue inputs. The ECI 6 MKII offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI 6 MKII with an even better power supply and a more sophisticated preamplifier module.
As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.
Preamplifier section |
|
Input impedance ( Balanced input ) |
47Kohm |
Maximum input level |
10 Volt RMS |
Noise floor ( 1Vrms, 20 - 20 kHz, balanced) |
-135 dB |
THD + N (1Vrms, 20 - 20 kHz, balanced) |
<0.004% |
Gain (Balanced) |
0 dB |
|
|
Amplifier section |
|
Output Impedance |
< 0,02 Ohm |
Frequency response |
1 – 150 kHz |
Channel separation |
> 120 dB |
THD ( 20 - 20 kHz) |
< 0.004% |
Maximum peak current |
>100A |
Damping factor 8 ohm load |
>350 |
I Input sensitivity 120W output |
1.3Vrms |
Input sensitivity HT 120W output |
1Vrms |
Gain HT Input |
x36 (31 dB) |
Rated output power |
|
8 ohms |
2 x 125 W |
4 ohms |
2 x 200 W |
2 ohms |
2 x 370 W |
Power consumption |
110 W |
Standby |
1W |
(no load or signal) |
|
|
|
Dimensions |
|
Width |
470 mm / 18.3 inches |
Depth ( with a speaker terminals) |
430 mm / 16,9 inches |
Height |
128 mm / 5 inches |
Weight |
20,5 Kg / 45 lbs. |