sE-7 Side Fire (Matched Pair)

sE7 sideFire Matched Pair

Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.

sE7 sideFire

The sE7 sideFire is a variant of our sE7 high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond, with a rotated capsule to allow for close miking

Specs

Components

Capsule1 / 2" Back-electret condenser capsule

Power

Electrical impedance<200 Ohms

Recommended load impedance>1k Ohms

Connectivity3-pin male XLR connector

Powering48V Phantom Power (P48 according to IEC 61938)

Sound

Polar patternsCardioid

Frequency range20 Hz - 20 kHz

Sensitivity19 mV / Pa (-34.5 dBV)

Max SPL136 / 156 dB (0 / 20 dB attenuation pad)

Equivalent noise level16 dB

Dynamic range120 / 140 dB (0 / 20 dB attenuation pad)

Signal to noise ratio78 dB

Low-cut filter80 Hz, 6 dB / Oct, switchable

Attenuation pad20 dB, switchable

Current consumption3.0 mA

Dimensions

Mic Diameter23 mm (0.91 in.)

Mic length130 mm (5.12 in.)

Mic weight163 g (5.75 oz.)

What's in the box

sE7 sideFire microphone

mic clip (with thread adapter)

wind screen