ATND1061DAN

Beamforming Ceiling Array Microphone with DANTE

CHF 3'290.00 CHF 3'043.48
SKU
ATND1061DAN
  • The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small

  • Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ

  • User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings

  • Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types

  • Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants

  • Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations

  • Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling

  • Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)

  • Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)

  • Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount

  • UL 2043 compliant for installation in plenum spaces

  • Includes tile bridge, safety wiring, and mounting hardware and accessories

  • Low-reflective white finish matches ceiling tiles in most environments

  • Powered by network PoE

Microphone
Beam Width 90-degrees
Polar Pattern Beam pattern
Frequency Response 60 Hz to 18,000 Hz
Maximum Input Sound Level 102 dBSPL
Sensitivity -8 dBFS (1 kHz, 94 dBSPL)
Dynamic Range 89 dB (A-weighted)
Signal-to-Noise Ratio 61.5 dB (A-weighted)
Self-Noise 25 dBSPL (A-weighted)
Analog Audio
Frequency Response 20 Hz to 20 kHz (+1.0/-2.0 dB)
Dynamic Range 100 dB (A-weighted)
Signal to Noise Ratio 80 dB (A-weighted)
Headroom 20 dB
Residual Noise -75.8 dBu (A-weighted)
T.H.D <0.1% (1 kHz, unity)
Analog Input MIC Maximum: -30 dBu
MIC Unity: -50 dBu
LINE Maximum: +12.2 dBu
LINE Unity: -10 dBV, Switchable
Analog Output OUTPUT Maximum: +19.2 dBu
OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable
General Specifications - Beamforming Array
Power Requirement PoE (IEEE 802.3af Class 0)
Power Consumption Max. 7 W
Operation Temperature Range 0°C to 40°C (32°F to 104°F)
Operation Humidity Range 25% to 85% (Non condensing)
Dimensions 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) (W × D×H)
Weight 1250 g (44 oz)
Network Dante: 1 Gbps
IP control: 100 Mbps
Digital Audio Sampling rate: 48 kHz
Bit depth: 24 bit
Latency Microphone (CH1 to CH6): 47 msec
Microphone (Auto Mix CH): 79 msec
Dante: Min. 250 usec, Max. 5 msec
I/O Connector Network/Dante: RJ-45
Analog input: Euroblock 3 pin
Analog output: Euroblock 3 pin
GPI: Euroblock 3 pin
Phantom Power Analog input: 12 V
Included Accessories ・IR remote controller
・Surface mount adapter
・Screw (M4 × 50 mm) × 4
・Flush mount adapter
・Flush mount cover
・Screw (M4 × 10 mm) × 12
・Hole cover
・Nut × 4
・Snap bushing × 2
・Tile bridge A × 2
・Tile bridge B × 2
・Tile bridge C × 4
・Seismic cable
・Zip tie
・Safety belt
・Euroblock connector × 3
・Installation template
Eigene Bewertung schreiben
Sie bewerten:ATND1061DAN
Ihre Bewertung
© 2020 MGM Audio AG. All Rights Reserved.